Roofing Systems and Accessories 

METAL SCOPE INDIA

Screenshot 2020-05-08 at 5.20.56 PM.png

Roofing Systems and Accessories 

Explore

Standing Seam

METAL SCOPE INDIA

 Standing seam metal roofing is a concealed fastener roofing system that features vertical or trapezoidal legs with flat space in between. This metal roofing is one of the most durable and weather-tight roof systems available in the industry. Since these panels are attached to the roof deck with clamps, they're free of any holes from nails or other fasteners which could allow moisture to seep through.

  • Onsite production of the roof eliminates damage to the sheets. 

  • Single long sheets with no joints.

  • No screws are used and hence long-lasting.

  • Single long length sheets can be manufactured at the site without overlaps.

  • Standing seam profile roofs are used for low slope by means of single long sheets with no joints.

  • Onsite profiling sheets can be manufactured in long lengths which reduces transportation costs and damages.

  • Innovative architecture appearance gives flexibility in design.

  • Material is Eco-friendly because it is recyclable.

 

Screw down Profile

  • Lightweight, Economical roof profile with excellent design flexibility 

  • Available in 0.47, 0.50, 0.55, 0.80mm thickness

  • Available in attractive colors in PPGI, PPGL & Galvalume 

Material specification

Roofing%20Systems%20and%20Accessories%20

Roofing & Cladding

METAL SCOPE INDIA

Royal Met ~ DURA

image1.png
image3.png
image5.png

Royal Met ~ TOUGH

image7.png
image8.png
image10.png

Royal Met ~ LURE

image2.png
image4.png
image6.png

Royal Met ~ TILE

image7.png
image9.png
image11.png

Roofing Street

image12.png

Specifications

 •Excellent Corrosion Resistance

 •Resistance to Peeling and Flaking

 •Aesthetic Appel:allows for architectural creativity

 •Excellent Form ability and design flexibility

 •Easy - to - install

 •Maintenance - free

 •Recyclable and environment Friendly

 •Lightweight but Structurally Strong, ability to resist strong winds

 •Thermal efficiency

Purlins

METAL SCOPE INDIA

Cee and Zee PURLIN (Available purlin size)

Secondary members used in a PEB includes purlins, side runners, eave struts, fascia channels, door posts window posts, rafter stays, column stays, base angles, and other miscellaneous structural parts. These purlins and channels sections give an excellent strength-to-weight ratio, thus giving tremendous cost saving. They are manufactured from galvanized coil conforming to ASTM – A 653M, Grade M having yield strength of 345 MPA and from HR coil ASTM A 570 M Grade B having

image3.png
image4.png

Decking Sheet

METAL SCOPE INDIA

decking_sheet.jpg

These sheets support the roof elements by providing exceptional strength and strong structural platform.

Roof vent & Day light

METAL SCOPE INDIA

Khouri+Group+Green+Technologies+-+Ventil

Day / Sky Light

Day Light is the Combination of all direct & indirect Sunlight outdoor during the daytime. For that Polycarbonate & FRP is widely used in the market due to its enormous merit like bright, clean appearance, light weight, high performance anti corrosive & high light transmittance etc.

 

Poly carbonate

Poly carbonate roof sheets are commonly called transparent steel due to their wonderful impact resistance and glass like clarity. These plastic corrugated roof sheets can also be engineered to suit various innovative applications in the future.

 

FRP Sheet

FRP sheets are used for all kinds of roofing solutions. It comes in different profiles and sizes Viz:- Ac profile, G.I. profile, Plain sheets, MSIPL profile etc. FRP roofing sheets are exclusively made with powder bond mat and resin. The resin comes with ultra violet resistance

 

Natural Ventilation System

Crucial Ventilation System is an important aspect for the workers in the production unit for fresh breathing of air. It is proved that sufficient ventilation improves the production rate as well as the worker longevity. Heat generated from the factories and manufacturing units are considerably high and would be vent out using modern methodology.

 

Roof Ventilator

MSIPL supplies Roof Ventilators of light weight, strong corrosion resistant, high air venting efficient high revolving sensitivity. It is varying pitch hence can be adjusted according to the slope of the building. It starts to revolve at the wind speed of 5km/hr. Available sizes – 500mm/600 roof ventilator made of 3005# aluminium alloys as base material, on the surface with coating of 20µm thickness fluorine carbon polyester; with Japanese NSK sealed bearing, fireproofing reinforced nylon support or metal support, rivet to connect. Stainless steel ventilators are also available on request.

 

Ridge Vent

Made up of Durable 26 gauge standard Pre-painted or galvanometer exterior ,Internal components of 24 gauge steel, reinforced bracing and additional fasteners with the size of 10 ft. sections of 9" throat and 12" throat Other sizes available upon request with fully protected by 4 x 4 mesh galvanized hardware cloth, Easy-moving.

Principle of Rain Resistance and leak Proofing

image.png

Available Size Ø500 & 600
Base Material SS304 / Aluminum Alloy